Mitel A6867i User Manual page 44

Filter function
Filtered superv.
Xfer
You are filtered.
Filterer superv.
Filterer superv.
• Press the blinking line key (L1 for example). You can also press
the key or lift the handset.
If you are already on line, the same message appears and you
hear a beep:
• Press the new blinking line key (L2 for example).
Transfer the inbound call to the filtered set:
You wish to transfer the intercepted call to the filtered terminal.
1 - Press a free line key (L2 for example).
2 - Press the supervision key corresponding to the filtered
terminal.
-> The indicator light associated with the programmed key goes
on.
3 - Once you are communicating with the filtered terminal, press
the context Xfer
4 - Press the key of the blinking line then press Transfer (L1 for
example). This is the correspondent who has been on hold.
Before the transfer you can change from one call to the other by
pressing the L1 and L2 keys.
Calling the filtering terminal:
You want to call the designated user of the filtering set:
• Press the supervision key corresponding to the filtering
terminal.
-> The indicator light associated with the programmed key goes
on.
Picking up a call meant for you:
A call meant for you arrives on the filtering terminal. On your
terminal, the indicator light associated with the supervision key of
the filtering terminal blinks rapidly.
• Press the supervision key then lift the handset to talk to your
correspondent.
- 39 -
key.