Table of Contents
Advertisement
Making a call
There are several ways to make a call, depending on whether the called party's number is
new or has already been stored by the terminal.
The procedures for calling the parties whose numbers have been stored in the logs are
explained in the chapters dedicated to these features.
When the called party answers, you may use any of the previously described modes.
Dialling the number
You will use the keys on the numeric keypad to dial the correspondent's number.
Note:
For more information on how to dial numbers, see Section
.
*
To call an internal correspondent:
To call an external correspondent:
0
Using speed dial keys
You can assign nine keypad keys to the numbers of the parties you call regularly (internal
or external).
1
9
to
* Depending on the programming performed by the system operator
Dial the correspondent's extension number.
-> The display shows the name of the correspondent*.
1 - Dial the outside line access code (0) or
2 - Dial the correspondent's number.
-> The display shows the number dialled or called party's
name, if available in the directory.
Press and hold down any of the keypad keys (1 to 9).
-> The terminal automatically dials the number of the
correspondent to whom this key had been previously
assigned. The display shows the name of the correspondent
if available.
Note:
To program a speed dial key, see Chapter
number on a keypad key", page 21
"Other options", page 49
.
- 9 -
.
"Saving a
Advertisement
Table of Contents
