Table of Contents
Advertisement
During a call
On the second, idle terminal
Menu
Recover parking
On the same terminal:
Menu
Recover parking
Swapping a call between two terminals in the same association
Your subscription has several associated terminals: one fixed terminal and one DECT ter-
minal, for instance. In this example, you wish to resume on the DECT terminal a call
already set up on the fixed terminal
# 7 0
* Depending on the programming performed by the system operator
(A67xxxi
series):
1 - Press the context
2 - Press the
key to display
Select
to confirm.
3 - Dial the number of the terminal on which you have executed
the Parking function then click
-> Communication with your correspondent has been restored.
Note:
If an external parked call is not resumed within a given
time, it is routed to the operator. An internal call is released.
Via feature code:
Recovering a parked call: # 7 0 + extension number
If you change your mind and wish to recover the call on the
terminal where it has been parked:
1 - Press the context
Press the
key to display
confirm.
-> Communication with your correspondent has been restored.
Via feature code:
Recover the parked call: # 7 0 + extension number
1 - From the terminal of the association on which you wish to
resume the call (the DECT terminal in our example), enter the
code # 7 0 or
-> A confirmation message is transmitted.
2 - On the first terminal, release the call by hanging up or by
pressing the End key.
-> The call is now set up on the second terminal.
Menu
key.
Recover parking
OK
Menu
key.
Recover parking
.
- 14 -
then press
to confirm.
then press
Select
to
*
Advertisement
Table of Contents
