Table of Contents
Advertisement
Terminal settings
Setting the display
Setting the dialpad
Live dialpad
Speed dial edit
Go to the
Display
(
Home screen
mode:
-> Use the
and
Home screen mode
-> Press the
key to highlight
seconds the screen saver timeout
Brightness
-> Adjust the
Brightness Level
keys.
-> Enter in seconds the
backlight goes off.
Go to the
Dialpad
(
1 - Select a sub-menu (
This option is used to correct the phone number being entered:
• Off: for correcting the number being entered using the
You have to press
• On: does not allow the number to be corrected. The call is
automatically started at the end of the input.
This option is used to save a phone number on a digital key on
the keypad (see "Speed dial", Page 21) or on a programmable
key. However, since the programmed keys are not visible from
Aastra Phone Suite in this way, there may be a clash between
these two programming types.
On the other hand, these keys are programmed on the terminal
and their programming is lost if the subscription moves (login/
logout). They are not accessible from an associated terminal.
- 48 -
) menu.
navigation buttons to change the desired
Screen Saver
using the horizontal browser
Brightness Timer,
) menu
).
Dial
to start the call.
Timer: enter in
time before the LCD
key.
Advertisement
Table of Contents
