Table of Contents
Advertisement
Configuration options
Standby mode*
You wish to step out whereas some colleagues have activated call forwarding or filtering
to your terminal. This function allows these calls to be temporarily forwarded to the owners
so callers are not penalised. If you are part of a hunt group, your terminal will be excluded
from this.
General standby
Deactivating a hunt group
Group deactivation
Remote forwarding
Remote forward
* Depending on the programming performed by the system operator
1 - Select
Settings
2 - Select
General standby
A message on the screen confirms the activation of this function.
You only receive your own calls.
You can cancel the function for the same operation.
You can also cancel it the function by accessing the active
functions
(Menu
*
Your terminal is part of a call group and you wish to temporarily
remove this terminal from the group.
1 - Select
Settings
2 - Select
Group deactivation
You can return to the group using this same procedure. You can
also do so by accessing the active functions
features).
Via feature code:
Enabled:
Disable: # 4 8
*
From your terminal, you have the possibility to forward calls from
another terminal to your terminal.
1 - Select
Settings
1 - Select
Remote
2 - Enter the number of the terminal whose calls must be
forwarded to your terminal.
3 - Click
OK
to confirm.
Via feature code:
Enabled:
Disable: # 2 4
(
then
Calls.
)
then press
>
Activated
features).
(
then
Calls.
)
then press
* 4 8
(
then
Calls.
)
forward.
* 2 4 + extension number
- 44 -
Select
or
to confirm.
Select
or
to confirm.
(Menu
>
Activated
Advertisement
Table of Contents
