Figure 41 WDS: Scan
The following table describes the labels in this screen.
Table 27 WDS: Scan
LABEL
Wireless Bridge Scan Setup
Refresh
#
SSID
BSSID
Apply
Cancel
7.8 The Others Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Others. The screen appears as shown.
See
Section 7.10.2 on page 120
Figure 42 Network Setting > Wireless > Others
Chapter 7 Wireless
DESCRIPTION
Click Refresh to update the table.
This is the index number of the entry.
This shows the SSID of the available wireless device within range.
This shows the MAC address of the available wireless device within range.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
for detailed definitions of the terms listed in this screen.
VMG4381-B10A User's Guide
116