ZyXEL Communications VMG4381-B10A User Manual page 92

Table 11 Network Setting > Broadband > 3G Backup (continued)
LABEL DESCRIPTION
Obtain DNS Select this to have the Device get the DNS server addresses from the ISP automatically.
info
dynamically
Use the Select this to have the Device use the DNS server addresses you configure manually.
following static
DNS IP address
Primary DNS Enter the first DNS server address assigned by the ISP.
server
Secondary DNS Enter the second DNS server address assigned by the ISP.
server
Advanced Click this to show the advanced 3G backup settings.
Budget Setup
Enable Budget Select Enable to set a monthly limit for the user account of the installed 3G card. You can
Control set a limit on the total traffic and/or call time. The Device takes the actions you specified
when a limit is exceeded during the month.
Time Budget Select this and specify the amount of time (in hours) that the 3G connection can be used
within one month. If you change the value after you configure and enable budget control,
the Device resets the statistics.
Data Budget Select this and specify how much downstream and/or upstream data (in Mega bytes) can be
(Mbytes) transmitted via the 3G connection within one month.
Select Download/Upload to set a limit on the total traffic in both directions.
Select Download to set a limit on the downstream traffic (from the ISP to the Device).
Select Upload to set a limit on the upstream traffic (from the Device to the ISP).
If you change the value after you configure and enable budget control, the Device resets the
statistics.
Data Budget Select this and specify how much downstream and/or upstream data (in k Packets) can be
(kPackets) transmitted via the 3G connection within one month.
Select Download/Upload to set a limit on the total traffic in both directions.
Select Download to set a limit on the downstream traffic (from the ISP to the Device).
Select Upload to set a limit on the upstream traffic (from the Device to the ISP).
If you change the value after you configure and enable budget control, the Device resets the
statistics.
Reset all Select the date on which the Device resets the budget every month. Select last if you want
budget the Device to reset the budget on the last day of the month. Select specific and enter the
counters on number of the date you want the Device to reset the budget
Reset time and Click this button to reset the time and data budgets immediately. The count starts over with
data budget the 3G connection's full configured monthly time and data budgets. This does not affect the
counters normal monthly budget restart; so if you configured the time and data budget counters to
reset on the second day of the month and you use this button on the first, the time and data
budget counters will still reset on the second.
Actions before Specify the actions the Device takes before the time or data limit exceeds.
over budget
Enable % of Select Enable and enter a number from 1 to 99 in the percentage fields. If you change the
time budget/ value after you configure and enable budget control, the Device resets the statistics.
data budget
(Mbytes)/data
budget
(kPackets)
Chapter 6 Broadband
VMG4381-B10A User's Guide
92