Edit 802.1X Settings; The Multi-Wan Screen - ZyXEL Communications SBG3300-N000 User Manual

6.6.1 Edit 802.1x Settings

Use this screen to edit a 802.1x authentication's settings. Click the Edit icon next to the rule you
want to edit. The screen shown next appears.
Figure 30 802.1x: Add/Edit
The following table describes the labels in this screen.
Table 16 802.1x: Add/Edit
LABEL
Active
Interface
EAP Identity
EAP method
Enable
Bidirectional
Authentication
Certificate
Trusted CA
Apply
Cancel

6.7 The multi-WAN Screen

Use the multi-WAN screen to configure the multiple WAN load balance and failover rules to
distribute traffic among different interfaces. This helps to increase overall network throughput and
reliability. Load balancing divides traffic loads between multiple interfaces. This allows you to
improve quality of service and maximize bandwidth utilization for multiple ISP links.
SBG3300-N Series User's Guide
DESCRIPTION
This field allows you to activate/deactivate the authentication.
Select this to enable the authentication. Clear this to disable this authentication without
having to delete the entry.
Select the interface that uses the authentication.
Enter the EAP identity of the authentication.
This is the EAP method used for this authentication.
Select this to allow bidirectional authentication.
Select the certificate you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Local Certificates screen.
Select the Trusted CA you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Trusted CA screen.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
Chapter 6 Broadband
139