Edit Guest/More Ap Settings - ZyXEL Communications EX5501-B0 User Manual

The following table introduces the supported wireless networks.
Table 24 Supported Wireless Networks
WIRELESS NETWORKS
Main/1
Guest/3
Figure 57 Network Setting > Wireless > Guest/More AP
The following table describes the labels in this screen.
Table 25 Network Setting > Wireless > Guest/More AP
LABEL
#
Status
SSID
Security
Guest WLAN
Modify

7.3.1 Edit Guest/More AP Settings

Use this screen to create Guest and additional wireless networks with different security settings.
Note: If upstream/downstream bandwidth is empty, the Zyxel Device sets the value
automatically. Setting a maximum upstream/downstream bandwidth will significantly
decrease wireless performance.
Click the Edit icon next to an SSID in the Guest/More AP screen. The following screen displays.
Chapter 7 Wireless
WHERE TO CONFIGURE
Network Setting > Wireless > General screen
Network Setting > Wireless > Guest/More AP screen
DESCRIPTION
This is the index number of the entry.
This field indicates whether this SSID is active. A yellow bulb signifies that this SSID is active, while a
gray bulb signifies that this SSID is not active.
An SSID profile is the set of parameters relating to one of the Zyxel Device's BSSs. The SSID (Service
Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client scans for
an AP to associate with, this is the name that is broadcast and seen in the wireless client utility.
This field indicates the security mode of the SSID profile.
This displays if the guest WiFi function has been enabled for this wireless LAN.
If Home Guest displays, clients can connect to each other directly.
If External Guest displays, clients are blocked from connecting to each other directly.
N/A displays if guest wireless LAN is disabled.
Click the Edit icon to configure the SSID profile.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
101