Edit 802.1X Settings - ZyXEL Communications SBG3500-N000 User Manual

Table 15 Network Setting > Network Setting > 802.1x (continued)
LABEL
Apply
Cancel

6.6.1 Edit 802.1x Settings

Use this screen to edit a 802.1x authentication's settings. Click the Edit icon next to the rule you
want to edit. The screen shown next appears.
Figure 31 802.1x: Add/Edit
The following table describes the labels in this screen.
Table 16 802.1x: Add/Edit
LABEL
Active
Interface
EAP Identity
EAP method
Enable
Bidirectional
Authentication
Certificate
Trusted CA
Apply
Cancel
Chapter 6 Broadband
DESCRIPTION
Click Apply to save your changes back to the SBG3500-N Series.
Click Cancel to return to the previous configuration.
DESCRIPTION
This field allows you to activate/deactivate the authentication.
Select this to enable the authentication. Clear this to disable this authentication without
having to delete the entry.
Select the interface that uses the authentication.
Enter the EAP identity of the authentication.
This is the EAP method used for this authentication.
Select this to allow bidirectional authentication.
Select the certificate you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Local Certificates screen.
Select the Trusted CA you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Trusted CA screen.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
SBG3500-N Series User's Guide
121