Wireless; Home Networking; Routing; Interface Group - ZyXEL Communications VMG4381-B10A User Manual

Table 3 Navigation Panel Summary (continued)
LINK TAB

Wireless

General
More AP
MAC
Authentication
WPS
WMM
WDS
Others
Channel
Home LAN Setup
Networking
Static DHCP
UPnP
Additional
Subnet
STB Vendor ID
5th Ethernet
Port

Routing

Static Route
Policy
Forwarding
QoS General
Queue Setup
Class Setup
Policer Setup
Monitor
NAT Port Forwarding
Applications
Port Triggering
DMZ
ALG
Address Mapping Use this screen to change your Device's address mapping settings.
DNS DNS Entry
Dynamic DNS
Interface
Group
Chapter 2 The Web Configurator
FUNCTION
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
Use this screen to configure multiple BSSs on the Device.
Use this screen to block or allow wireless traffic from wireless devices
of certain SSIDs and MAC addresses to the Device.
Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
Use this screen to set up Wireless Distribution System (WDS) links to
other access points.
Use this screen to configure advanced wireless settings.
Use this screen to scan wireless LAN channel noises and view the
results.
Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Use this screen to assign specific IP addresses to individual MAC
addresses.
Use this screen to turn UPnP and UPnP NAT-T on or off.
Use this screen to configure IP alias and public static IP.
Use this screen to have the Device automatically create static DHCP
entries for Set Top Box (STB) devices when they request IP
addresses.
Use this screen to configure the Ethernet WAN port as a LAN port.
Use this screen to view and set up static routes on the Device.
Use this screen to configure policy routing on the Device.
Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Use this screen to configure QoS queues.
Use this screen to define a classifier.
Use these screens to configure QoS policers.
Use this screen to view QoS packets statistics.
Use this screen to make your local servers visible to the outside
world.
Use this screen to configure servers behind the Device.
Use this screen to change your Device's port triggering settings.
Use this screen to configure a default server which receives packets
from ports that are not specified in the Port Forwarding screen.
Use this screen to enable or disable SIP ALG.
Use this screen to view and configure DNS routes.
Use this screen to allow a static hostname alias for a dynamic IP
address.
Use this screen to map a port to a PVC or bridge group.
VMG4381-B10A User's Guide
30