The Reset Button - ZyXEL Communications VMG4381-B10A User Manual

Table 1 LED Descriptions (continued)
LED
ETHERNET
WAN
DSL1,2
INTERNET
USB
MoCA
HPNA
WLAN/WPS
A. HPNA-equipped models only.

1.6 The RESET Button

If you forget your password or cannot access the web configurator, you will need to use the RESET
button at the back of the device to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the password will be reset to "1234".
Chapter 1 Introducing the Device
COLOR STATUS DESCRIPTION
Green On The Gigabit Ethernet connection is working.
Blinking The Device is sending or receiving data to/from the Gigabit
Ethernet link.
Off There is no Gigabit Ethernet link.
Green On The ADSL line is up.
Blinking The Device is initializing the ADSL line.
Off The ADSL line is down.
Orange On The VDSL line is up.
Blinking The Device is initializing the VDSL line.
Off The VDSL line is down.
Green On The Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by
a DHCP server), PPP negotiation was successfully completed (if
used) and the DSL connection is up.
Blinking The Device is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged
mode.
Green On The Device recognizes a USB connection.
Blinking The Device is sending/receiving data to /from the USB device
connected to it.
Off The Device does not detect a USB connection.
Green On The Device has proper MoCA network link.
Blinking The Device has LAN activity.
Off The device does not have MoCA network.
Green On The Device is connected to an HPNA-equipped device through
the coaxial cable.
Blinking Data is transmitting over the HPNA cable.
Off No HPNA device is connected.
Green On The wireless network is activated.
Blinking The Device is communicating with other wireless clients.
Green Blinking The Device is setting up a WPS connection.
and
Orange
Off The wireless network is not activated.
VMG4381-B10A User's Guide
A
22