Management Of Central Monitoring Station (Sms) - 3i Dualnet-6 Instruction Manual

07. MANAGEMENT OF CENTRAL MONITORING STATION (CMS)
Enter the programming menu and go to the window "CMS options"
Press the key On the display appears:
E
Inter your account number from 0000 to 9999. This number must be supplied by the CMS. If this
number is not inserted, only an SMS of the panel status will be sent. It is important, however, to
select "YES" on the control panel option for the installation status in order to receive the SMS status
information message.
Press the key E to confirm.
On the display appears:
With the keys or
With the keys or
With the keys or
With the keys or
panel will exit the programming mode and activate to send an SMS "Manual Test" to the 1st Tel.
number selected like Contact ID to send an SMS that is in the menu "Personal #". This test can be
made also when the panel is in function but disarmed by pressing the digits of the end user password
followed by .Leaving the lection as "NO" and pressing the key
5 T
DUALNET—6 INSTRUCTION MANUAL
Siren Durations
CM
S Options
Enter Account #
0001
Arming Status?
YES NO
select " YES" or "NO" and confirm with key
AC Loss
YES NO
select " YES" or "NO" and confirm with key
Low Battery
YES NO
select " YES" or "NO" and confirm with key
Manual Test
YES NO
select " YES" or "NO" and confirm with key
ENGLISH
on the display appears
E
The DUALNET-6 send a SMS
with text: AC Loss (10 minutes
after the power failure).
on the display appears
E
on the display appears
E
E
. In this case the
on the display you will see
E
Pag. 17