Password Management - 3i Dualnet-6 Instruction Manual

ENGLISH

00 Password Management:

HOW TO CHANGE THE END USER PASSWORD (FACTORY SETTING IS 1111)
With control panel disarmed, on keypad press:
On display will appear:
To change the end user Password, on the display select "User Code", and confirm with
On the display will appear:
Enter the factory installed Password (1234) and confirm with
On the display will appear:
Digit the new end user password and confirm with
On the display will appear:
Digit the new end user password and confirm with
Pag. 10
# + 9999 +
E
er Code
Us
Distress Code
Installer Code
E
Enter New Code
E
Re-Enter Code
, the panel will return to Disarmed status.
E
Note: It is necessary that you
know the installer password.
E
Insert the new end user
Password.
DUALNET-6 MANUAL