Table of Contents
Advertisement
Select the group
Edit Name
Follow these steps to enter/edit the group name.
1. Rotate the scroll control to select the first letter.
2. Press
control to the left. To move the cursor to the right,
press 6/
control to the right.
3. Repeat Steps 1 and 2 until you have entered the
system name. Then press E or press down on the
scroll control to accept the setting.
Hints:
• Each group name can be up to 16 characters.
Abbreviate as necessary to fit.
• The group and system name alternate in the top
line of the display when the scanner stops on a
channel.
• Press
• Press
Setting the Group Quick Key
Program System
Menu
Select the system
Edit Group
Select the group
Set Quick Key
After selecting this option, press 0-9 to assign the
group to a quick key or press
no quick key, then press E.
Hints:
• You can assign as many groups to the same quick
key as you want.
• A group's quick key must be activated to be scanned.
50
/4, or hold
Func
or hold
Func
twice to delete the current character.
three times to clear the entire alpha tag.
then rotate the scroll
and rotate the scroll
to assign the group to
Advertisement
Table of Contents
