Using the Menu
The scanner's menu lets you select options that let
you set up and use the scanner.
To use the menu, press
scanner. To select a menu item, rotate the scroll
control clockwise or counterclockwise. The currently-
selected menu item is highlighted with a bar on the
display. When the menu item you want to select is
highlighted, briefly press the scroll control to select it.
To back up a level, press
mode, press
This table shows the scanner's menu structure. To find
information about a particular menu setting in this
manual, go to the page number shown in parentheses
next to the setting.
Note: Not all of the options shown in this table may
appear at the same time. To view all available options
on any screen, rotate the scroll control.
Menu Item
-- M E N U --
Program System
Srch/CloCall Opt
Search for ...
-- M E N U --
Program System
Srch/CloCall Opt
Search for ...
-- M E N U --
Program System
Srch/CloCall Opt
Search for ...
36
Using the Menu
Menu
Menu
again or the L/O key.
Menu
Submenu
Select System
New System
Srch/CloCall Opt
Freq Lockouts
Broadcast Screen
CTCSS/DCS Search
Srch/CloCall Opt
Max Auto Store
Set Delay Time
Set Modulation
Set Attenuator
Set Data Skip
Set Step
Air Band Step
Search for ...
Service Search
Edit Service
Custom Search
Srch/CloCall Opt
Edit Custom
Search and Store
on the left side of the
. To exit the menu
(32)
(70)
(71)
(16)
(72)
(74)
(55) (72)
(73)
(73)
(74)
(75)
(59)
(62)
(60)
(61)
(63)