Scanning Systems; Selecting Systems To Scan - Uniden UBC3500XLT Owner's Manual

Scanning Systems

To begin scanning programmed systems, press Scan.
The UBC3500XLT scans all unlocked systems in all
activated quick-key groups and any searches
unlocked for search and scan.
Notes:
• If no systems are programmed, or all systems are
locked out, an error message appears. Program a
system or select a system to scan.
• When scanning multiple systems, the
UBC3500XLT scans systems according to the
assigned quick key. Systems assigned to quick
key 1 are scanned first, then 2, 3, 4, etc. Systems
not assigned to a quick key are scanned last, then
unlocked searches. Within a quick key, systems
are scanned in the order they were assigned.
• Within a system, channels are scanned according
to the assigned channel group, with the same
priority as described above for systems.
• The UBC3500XLT scans a system for the duration
you set using the System Hold Time option (see
"Setting the System Hold Time" on Page 47).
Conventional systems operate similarly, but all
unlocked channels are scanned at least one time
regardless of the hold time setting.
• Each search range is searched for the amount of
time you set using the "Set Hold Time" option. See
"Setting the System Hold Time" on Page 47 for
more information.

Selecting Systems to Scan

To select systems to scan, press Scan then press the
quick key assigned to the system or systems you want
to scan. For quick keys 0-9, press the quick key's
number. For quick keys 10-99, press
32
then press the