Setting Attenuation; Setting Data Skip - Uniden UBC3500XLT Owner's Manual

Hide thumbs Also See for UBC3500XLT:

Table of Contents

This setting controls the modulation type used for

quick search and Close Call operations. Select your

setting, then press the scroll control.

Auto Uses the default setting for the current

frequency (see the table at the front of the manual)

Uses AM (amplitude modulation)

FM Uses FM (frequency modulation)

NFM Uses narrowband FM

WFM Uses wideband FM

WFM (Broadcast) Uses WFM Broadcast.

Setting Attenuation

Set Attenuator

This setting controls the attenuator for quick search

and Close Call operation. Select your setting, then

press the scroll control.

Reception is attenuated by about 25 dB.

Off The attenuator is off.

Note: Turn on this setting if you are near other strong

signal sources. Attenuation sometimes helps to

reduce interference and desensitization that strong

signals create.

Set Data Skip

This setting controls how the scanner behaves when it

stops on a channel that has a data signal.

On - the scanner stops briefly on the channel, but then

immediately resumes scanning automatically.

Srch/CloCall Opt

Search and Close Call Options

Table of Contents