Editing A Custom Search Range - Uniden UBC3500XLT Owner's Manual

Editing a Custom Search Range

You can edit up to 10 custom search ranges. The
names of the custom search ranges appear on the
display. The default custom search range names
appear as Custom 1, Custom 2, and so on.
Menu
Edit Custom
Select your setting, then press the scroll control.
Edit Name - lets you edit the custom search range's
name
Edit Srch Limit - lets you view and select the
frequency ranges to search. The scanner prompts you
to enter the upper and lower search limits.
Set Delay Time - lets you set the amount of time
the scanner will delay before continuing to search after
a transmission ends
Set Modulation - lets you set the custom search
range's modulation type
Set Attenuator - lets you set whether the scanner
will attenuate reception by 25 dB during search
Set Data Skip - lets you set whether the scanner
will skip data transmissions during search
Set Step - lets you set the custom search range's
step (the gap between frequencies)
Search with Scan - sets whether the scanner
includes the custom search during scanning.
Set Lockout - lets you set whether the scanner
will scan the custom search range during scanning
Lockout - the custom search range is not
scanned during scanning
Unlocked - the custom search range is
scanned during scanning.
Note: Your can also lock or unlock a custom search
range by pressing
Search for ...
+ L/O. Or, you can select a
Func
Searching and Storing
61