Setting Close Call Options - Uniden UBC3500XLT Owner's Manual

Hide thumbs Also See for UBC3500XLT:

Table of Contents

• The Close Call feature cannot detect satellite

dishes or any transmitter with a frequency above

or below the frequency ranges listed under the

Set CC Bands: option on Page 68.

• The Close Call feature works better with some

types of transmissions than others. It might not

correctly display frequency information for

transmitters using a highly directional antenna

(such as an amateur radio beam antenna) or if

there are many transmitters operating at the same

time in the same area.

Setting Close Call Options

Select your setting, then press the scroll control.

Then turn the scroll control to select an option.

• Close Call Only: Lets you set the scanner

only for Close Call searching. The scanner

does not scan frequencies or channels when

this option is turned on. To select this option,

press E.

• CC Auto Store: Lets you select whether the

scanner automatically stores Close Call hits

into channels. If you turn this option on, the

scanner starts Close Call mode and stores any

Close Call hits, up to the maximum you

specified in the Max Auto Store setting. If the

scanner stores more hits than this setting, it

stops Autostore operation.

Turn the scroll control to display an option, then

press the scroll control.

• Set CC Mode: Lets you select the Close Call

mode. If you turn this option on (CC DND, CC

PRI), the scanner sets itself to its Close Call

settings about once every 2 seconds.

Turn the scroll control to display an option, then

press the scroll control.

Close Call

Table of Contents