Editing A Service Search - Uniden UBC3500XLT Owner's Manual

custom search range to lock or unlock by rotating the
scroll control with pressing
Set Hold Time - lets you set the amount of time
to hold the custom search range during scanning.
You can set Hold time from 0 to 255 seconds.
Notes:
• If you select 0, the scanner then searches the
entire range one time.
• The default setting is 2 seconds for each
search range.
• The scanner moves to the next system or
search range after the hold time expires, any
current transmission ends, and the channel
delay time expires.

Editing a Service Search

You can change the way service search works for
each service.
Menu
Edit Service
Select your setting, then press the scroll control.
• Set Delay Time This setting determines how
long the scanner waits after a transmission ends
before resuming quick search or Close Call
operation. Select your setting, then press the
scroll control.
Off The scanner resumes immediately when
the transmission ends.
1-5 sec The scanner waits the set amount of
time after the transmission ends before
resuming.
• Set Attenuator This setting controls the
attenuator for search operation. Select your
setting, then press the scroll control.
62
Search for ...
.
Func