Cisco PIX 500 Series Configuration Manual page 1077

Appendix E Configuring an External Server for Authorization and Authentication
Table E-5 Security Appliance Supported RADIUS Attributes and Values (continued)
Attribute Name
IPSec-Split-DNS-Names
IPSec-Tunnel-Type
IPSec-Mode-Config
IPSec-User-Group-Lock
IPSec-Over-UDP
IPSec-Over-UDP-Port
Banner2
PPTP-MPPC-Compression
L2TP-MPPC-Compression
IPSec-IP-Compression
IPSec-IKE-Peer-ID-Check
IKE-Keep-Alives
IPSec-Auth-On-Rekey
OL-12172-03
VPN Attr.
3000 ASA PIX #
Y Y Y
29
Y Y Y
30
Y Y Y
31
Y 33
Y Y Y
34
Y Y Y
35
Y Y Y
36
Y 37
Y 38
Y Y Y
39
Y Y Y
40
Y Y Y
41
Y Y Y
42
Cisco Security Appliance Command Line Configuration Guide
Configuring an External RADIUS Server
Single
or
Syntax/ Multi-
Type Valued Description or Value
Single
String Specifies the list of secondary
domain names to send to the
client (1-255 characters)
Single
Integer 1 = LAN-to-LAN
2 = Remote access
Single
Boolean 0 = Disabled
1 = Enabled
Single
Boolean 0 = Disabled
1 = Enabled
Single
Boolean 0 = Disabled
1 = Enabled
Single
Integer 4001 - 49151, default = 10000
Single
String A banner string. Banner2 string
is concatenated to Banner1
string if configured.
Single
Integer 0 = Disabled
1 = Enabled
Single
Integer 0 = Disabled
1 = Enabled
Single
Integer 0 = Disabled
1 = Enabled
Single
Integer 1 = Required
2 = If supported by peer
certificate
3 = Do not check
Single
Boolean 0 = Disabled
1 = Enabled
Single
Boolean 0 = Disabled
1 = Enabled
E-27