Example 9: Primary Unit Configuration; Example 9: Primary System Configuration - Cisco PIX 500 Series Configuration Manual

Security appliance command line
Hide thumbs Also See for PIX 500 Series:
Table of Contents

Advertisement

Appendix B
Sample Configurations
Figure B-8
Active/Active Failover Configuration
192.168.5.101
(admin)
Primary
Failover Group 1
Active
Active Contexts
-admin
192.168.0.1
(admin)
See the following sections for the configurations for this scenario:

Example 9: Primary Unit Configuration

See the following sections for the primary unit configuration:

Example 9: Primary System Configuration

You must first enable multiple context mode using the mode multiple command. The mode is not stored
in the configuration file, even though it endures reboots. Enter the show mode command to view the
current mode.
hostname ciscopix
enable password farscape
password crichton
asdm image flash:/asdm.bin
OL-12172-03
192.168.5.1
Switch
192.168.10.41
(ctx1)
10.0.4.1
Failover Link
State Link
192.168.20.11
(ctx1)
Switch
Example 9: Primary Unit Configuration
Example 9: Secondary Unit Configuration
Example 9: Primary System Configuration, page B-23
Example 9: Primary admin Context Configuration, page B-24
Example 9: Primary ctx1 Context Configuration, page B-25
Example 9: LAN-Based Active/Active Failover (Routed Mode)
Internet
192.168.10.71
Switch
Outside
192.168.5.111
(admin)
Switch
192.168.0.11
(admin)
Inside
Switch
Cisco Security Appliance Command Line Configuration Guide
192.168.10.31
(ctx1)
Secondary
Failover Group 2
Active
10.0.4.11
Active Contexts
-ctx1
192.168.20.1
(ctx1)
B-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asa 5500 series

Table of Contents