Cisco PIX 500 Series Configuration Manual page 1015

Security appliance command line

Hide thumbs Also See for PIX 500 Series:

Table of Contents

Sample Configurations

Example 10: Cable-Based Active/Standby Failover (Transparent Mode)

ip address 209.165.201.1 255.255.255.0 standby 209.165.201.2

failover link state Ethernet3

failover interface ip state 192.168.253.1 255.255.255.0 standby 192.168.253.2

route outside 0.0.0.0 0.0.0.0 209.165.201.4 1

Cisco Security Appliance Command Line Configuration Guide

Troubleshooting

Asa 5500 series