Ip Address Displays Invalid Value - LifeSize Room Installation Manual

IP Address Displays Invalid Value

After you complete the initial configuration, if the IP address that appears at the top of the
main screen displays an invalid value, one of the following conditions may exist:
Condition
The unit is configured to obtain an address
using DHCP and no DHCP server is
available.
Note: The DHCP client self-assigns an
address in the 169.254 class B network
and the red network symbol
the status bar on the main screen.
Faulty Ethernet cable connection.
The unit is configured to use a static IP
address, but no IP address has been
entered.
Network connection is unavailable.
A red network symbol
status bar on the main screen.
LifeSize Room Installation Guide
Resolution
Verify that the unit is plugged into a network that has a DHCP
server present.
appears in
Replace the Ethernet cable with a high quality cable.
Identify and enter the necessary IP information if you disable
DHCP.
Inspect your network connection.
appears in the
19