Connecting A Pstn Phone Line; Locking The Lifesize Codec - LifeSize Room Installation Manual

Hide thumbs Also See for Room:

Table of Contents

8. Insert the cord from the power adapter into the power outlet marked

the back panel of the codec (near the base). Insert one end of the power cord into the

power adapter and the opposite end into a power outlet on the wall.

The LifeSize system starts and illuminates a blue LED on the front of the codec. See

"Status Icons" on page 21 for more information about the state of the system as it boots

or as conditions change.

The camera initializes the first time it is connected to a codec; this process takes

approximately 90 seconds.

Caution:

Do not disturb or disconnect the devices during this time as you may

damage the system.

9. An Initial Configuration screen appears and prompts you to configure the system.

Refer to "Initial Configuration" on page 5 and the information you collected there

previously to guide you through your configuration choices. Use the arrow keys on the

remote control to navigate the preferences that appear in the initial configuration

screens. Icons that appear at the bottom of each screen correspond to keys on the

remote control and indicate what operations are available for the screen or a selected

object.

Note:

If the initial configuration screen does not appear and the display is blank, refer

to "Troubleshooting Installation Issues" on page 16.

The bottom of the screen contains the system status bar and the navigation bar. The

system status bar indicates system and network status. When the system is booting,

status also appears at the top of the REDIAL list to indicate the current state of the

system. See "Status Icons" on page 21 for an explanation of status icons you may

encounter.

Connecting a PSTN Phone Line

If you chose either the Touch Tone or Pulse options for the Voice Dialing preference during

the initial configuration, ensure that you connect an RJ-11 PSTN phone cord to the PSTN

phone port labeled

wall.

You can lock the LifeSize codec with a secure loop to prevent physical removal of the

device. For assistance, contact your LifeSize Channel Partner or LifeSize Customer

Support.

on the LifeSize codec and the other end to a phone jack on the

LifeSize Room Installation Guide

Table of Contents