Table of Contents
Advertisement
2.5.3 Universal Serial Bus Ports
USB 2
USB 1
2
1
Two onboard USB 2.0/1.1 ports (Black) are at location CN1 of
the system board.
J3 (USB 3-4) and J5 (USB 5-6) connectors allow you to connect
4 additional USB 2.0/1.1 ports. The additional USB ports, which
are mounted on card-edge brackets, will be provided as options.
If you wish to use the optional USB ports, install the card-edge
bracket to the system chassis then insert the connector that is
attached to the USB port cables to J3 and/or J5.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals
submenu ("SIS OnChip PCI Device" section) of the BIOS. Refer
to chapter 3 for more information.
If you are using a USB 2.0 device, you must enable the USB 2.0
function in the same BIOS submenu mentioned above.
USB 3-4
10
9
Hardware Installation
USB 5-6
2
1
2
10
9
29
Advertisement
Table of Contents
