DFI 748-AL User Manual page 79

Table of Contents

Advertisement

Month Alarm
This is used to select the month you would like the PC to
power-on.
Day of Month Alarm
0
The system will power-on everyday according to
the time set in the "Time (hh:mm:ss) Alarm" field.
1-31
Select a date you would like the system to
power-on. The system will power-on on the set
date, and time set in the "Time (hh:mm:ss) Alarm"
field.
Time (hh:mm:ss) Alarm
This is used to set the time you would like the system to power-
on. If you want the system to power-on everyday as set in the
"Day of Month Alarm" field, the time set in this field must be
later than the time of the RTC set in the Standard CMOS Fea-
tures submenu.
Reload Global Timer Events
When enabled, access to the specified field (Primary IDE, Second-
ary IDE, FDD/COM/LPT Port or PCI PIRQ[A-D]#) will cause the
system to wake up completely from the power management
mode. When disabled, the system will not wake up from the
power management mode despite access to the specified field.
BIOS Setup
3
79

Advertisement

Table of Contents
loading

This manual is also suitable for:

748-a

Table of Contents