DFI 748-AL User Manual page 74

3
BIOS Setup
3.1.5.3 Power Management
This field allows you to select the type (or degree) of power
saving by changing the length of idle time that elapses before the
Suspend mode field is activated.
Min Saving
Max Saving
User Define
3.1.5.4 Suspend Mode
This is selectable only when the Power Management field is set
to User Define. When the system enters the Suspend mode ac-
cording to the power saving time selected, the CPU and onboard
peripherals will be shut off.
3.1.5.5 Video Off Option
Always On
Suspend -> Off
All Modes -> Off The screen is off when the system is in the
3.1.5.6 Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This selection will cause the system to
Blank Screen
DPMS
74
Minimum power saving time for the Suspend
mode = 1 Hour
Maximum power saving time for the Suspend
mode = 1 Min.
Allows you to set the power saving time in the
"Suspend Mode" field.
The system BIOS will never turn off the
screen.
The screen is off when the system is in the
Suspend mode.
Doze, Standby or Suspend mode.
turn off the vertical and horizontal syn-
chronization ports and write blanks to the
video buffer.
This option only writes blanks to the video
buffer.
Initializes display power management signaling.
Use this option if your video board supports it.