DFI 748-AL User Manual page 28

2
Hardware Installation
2.5.2 RJ45 LAN Port (748-AL only)
RJ45 LAN
The 748-AL system board is equipped with an onboard RJ45
LAN port at location CN1 of the system board. It allows the
system board to connect to a local area network by means of a
network hub.
BIOS Setting
Enable or disable the onboard LAN in the Integrated Peripherals
submenu ("SIS OnChip PCI Device" section) of the BIOS. Refer
to chapter 3 for more information.
To wake up the system via the LAN port, set the "MACPME
Power Up Control" field ("PM Wake Up Events" section) in the
Power Management Setup submenu of the BIOS to Enabled.
Driver Installation
Install the "LAN Drivers". Refer to chapter 4 for more informa-
tion.
28