DFI 748-AL User Manual page 53

3.1.1.5 Video
This field selects the type of video adapter used for the primary
system monitor. Although secondary monitors are supported, you
do not have to select the type. The default setting is EGA/VGA.
EGA/VGA Enhanced Graphics Adapter/Video Graphics Array.
CGA 40
CGA 80
Mono
3.1.1.6 Halt On
This field determines whether the system will stop if an error is
detected during power up. The default setting is All Errors.
No Errors The system boot will not stop for any errors de-
All Errors The system boot will stop whenever the BIOS de-
All, But Keyboard The system boot will not stop for a key-
All, But Diskette
All, But Disk/Key
3.1.1.7 Base Memory
Displays the amount of base (or conventional) memory installed
in the system. The value of the base memory is typically 512K for
systems with 512K memory installed on the motherboard or
640K for systems with 640K or more memory installed on the
motherboard.
For EGA, VGA, SVGA and PGA monitor adapters.
Color Graphics Adapter. Power up in 40-column
mode.
Color Graphics Adapter. Power up in 80-column
mode.
Monochrome adapter. Includes high resolution
monochrome adapters.
tected.
tects a non-fatal error.
board error; it will stop for all other errors.
The system boot will not stop for a disk er-
ror; it will stop for all other errors.
The system boot will not stop for a disk or
keyboard error; it will stop for all other er-
rors.
BIOS Setup
3
53