Pc Health Status - DFI 748-AL User Manual

3
BIOS Setup

3.1.7 PC Health Status

The settings on the screen are for reference only. Your version may not be identical
to this one.
3.1.7.1 CPU (V)
This field shows the detected voltage of the processor.
3.1.7.2 VCC 1.8V, VCC 3.3V, +5V, +12V, 3VSB(V), -12V and 5VSB(V)
These fields show the output voltage of the power supply.
3.1.7.3 Current CPU Temperature, Current System Temp., Current
CPU Fan Speed and Current Chassis Fan Speed
These fields show the current temperature of the CPU, internal
temperature of the system, and the current fan speed of the CPU
and chassis fans in RPM (Revolutions Per Minute).
82
Note:
The onboard hardware monitor function is capable of detecting
"system health" conditions but if you want a warning message
to pop-up or a warning alarm to sound when an abnormal
condition occurs, you must install the Hardware Monitor utility.
This utility is included in the CD that came with the system
board. Refer to the Hardware Monitor section in chapter 4 for
more information.