DFI 748-AL User Manual page 76

3
BIOS Setup
Instant-Off
3.1.5.12 Power State Resume Control
Always Off
Always On
Keep Pre-State When power returns after an AC power fail-
3.1.5.13 PM Wake Up Events
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be identical
to this one.
IRQ [3-7, 9-15], NMI
The options are Enabled and Disabled.
76
Pressing and then releasing the power button at
once will immediately power off your system.
When power returns after an AC power fail-
ure, the system's power is off. You must press
the Power button to power-on the system.
When power returns after an AC power fail-
ure, the system will automatically power-on.
ure, the system will return to the state where
you left off before power failure occurs. If the
system's power is off when AC power failure
occurs, it will remain off when power returns.
If the system's power is on when AC power
failure occurs, the system will power-on when
power returns.