Ptz Connection - Santec DSR-2504H User Manual

3.5 PTZ connection

Please use the RS-485 connector.
You can also use it to connect a speed dome or a keyboard.
Here is how to connect a speed dome to the recorder:

Pull out the RS-485 terminal block from the terminal bar.

Loosen the screws.

Insert the signal wires into the A and B connections:
A = TX+

Pull the screws tight again.

Re-insert the RS-485 block into the terminal bar.

Connect the video cable of the speed dome to the video input of the recorder.
Note:
Please note that the transmission protocol is properly set.
_________________________________________________________________________________
B = TX-
- 88 -
Bedienungsanleitung / User manual
DSR-2504H, DSR-2516H