8.1.6.4 Main menu Setup Network Server
The server information are mainly used for connections to the optional CMS.
Select "Enable".
Server:
Here you can enter the IP address of your CMS server, i.e. of the computer on which
the CMS is installed.
Server port:
Default port is 2009. If required, the server port can be changed in the CMS.
Device ID:
Here you can enter an ID for your recorder.
By filling in the above data, the CMS will automatically connect the recorder.
_________________________________________________________________________________
- 116 -
Bedienungsanleitung / User manual
DSR-2504H, DSR-2516H