Remote System Configuration; Tools; Info - Santec DSR-2504H User Manual

10.8 Remote system configuration

You can remotely configure the recorder, e.g. live view, recording, schedule, alarm, network,
PTZ control and user management.
Click on "Config". The following window pops up:
On the left hand side, select the function you wish to re-configure.
On the right hand side, enter the desired parameters.
Note:
Only one user at a time can change the configurations.

10.9 Tools

Click on „Tools". The disk manager opens.

Status of the HDD

Formatting the HDD

View and change read/write properties.

10.10 Info

Information on the recorder are displayed here regarding system, event, log, network and
user.
_________________________________________________________________________________
- 150 -
Bedienungsanleitung / User manual
DSR-2504H, DSR-2516H