Main Menu  Setup  Schedule  Motion; Main Menu  Setup  Schedule  Sensor - Santec DSR-2504H User Manual

Bedienungsanleitung / User manual
DSR-2504H, DSR-2516H
You may also select a whole week in your schedule.
Double-click into the grid. The following window pops up:
Click on „Add".
Enter the desired start time and end time. Confirm by first clicking on the confirmation tack
and then on "OK".
8.1.4.2 Main menu  Setup  Schedule  Motion
Here you can define the schedule for motion recording.
The procedure is the same as described in chapter 8.1.4.1.
Note:
By default, the grid is fully enabled, i.e. it is blue, hence the schedule is active for all days
and times. To remove specific days or times, please use the rubber.
8.1.4.3 Main menu  Setup  Schedule  Sensor
Here you can define the schedule for sensor (alarm) recording.
The procedure is the same as described in chapter 8.1.4.1.
Note:
By default, the grid is fully enabled, i.e. it is blue, hence the schedule is active for all days
and times. To remove specific days or times, please use the rubber.
_________________________________________________________________________________
- 105 -