Switching On And Off; Switching On; Login - Santec DSR-2504H User Manual

Bedienungsanleitung / User manual
DSR-2504H, DSR-2516H

5. Switching on and off

5.1 Switching on


Verify that the camera(s) are properly connected to the recorder and that they are
switched on.

Connect one or several monitors to the recorder (VGA, HDMI, spot monitor BNC).

Connect a mouse to the recorder's USB port on the rear or front panel.

DSR-2504H: Connect the recorder to power. The recorder boots automatically, along
with a beep sound.

DSR-2516H: Connect the recorder to power. Use the power-on button on the
recorder rear to switch it on. The recorder boots, along with a beep sound.

The power LED on the front panel lights up in blue and the recorder starts operating.

Depending on your settings, the live image of the camera(s) or the wizard appears
(you can adjust the wizard settings here:
Menu  Setup  Basic  System  Show wizard (see chapter 8.1.1.1)

5.2 Login

In order to have full access to the recorder, you have to login. Click anywhere on the screen
to call-up the login window:
Click into the entry field of the user name resp. password. The virtual keyboard pops up.
Enter your user name and password and confirm by using the Enter key:
Default user name:
Default password:
For security reasons, it is highly recommended to change the default user name and
password and to enter another user.
Please see chapter 8.1.7.
_________________________________________________________________________________
admin
123456
- 91 -