Santec DSR-2504H User Manual page 108

Alarm:

Buzzer:
When enabled, an alarm sound is triggered at a detected alarm.

Show full screen:
When enabled, the selected channel is displayed as full screen at a detected alarm.

To alarm out:
When enabled, an external relay output is triggered at a sensor-based alarm.

E-Mail:
When enabled, the recorder sends an e-mail notification to the defined e-mail
address at a sensor-based alarm.

Snap:
When enabled, a snapshot is taken on the selected channels which is then saved to
the recorder HDD.
To record:
Select the channels which are to be recorded in case of an alarm. Then click on „OK".
PTZ:
In case of an alarm, define the action for each channel: Preset, cruise or track.
Schedule:
Here you can define the schedule for the alarm recording.
The procedure is the same as described in chapter 8.1.4.1.
Note:
By default, the grid is fully enabled, i.e. it is blue, hence the schedule is active for all days
and times. To remove specific days or times, please use the rubber.
_________________________________________________________________________________
- 108 -
Bedienungsanleitung / User manual
DSR-2504H, DSR-2516H