Santec DSR-2504H User Manual page 123

Bedienungsanleitung / User manual
DSR-2504H, DSR-2516H
Click on the wiper symbol to activate the PTZ wiper.
Click on the lamp symbol to activate the PTZ light.
Notes:
The wiper and light functions are only available if:
1. This function is supported by the PTZ device
2. The selected protocol is either Pelco-P or Pelco-D (see chapter 8.1.8.1).
Click on "Save" to save your settings.
Click on the little cross to close this window and to return to the previous menu.
Cruise settings:

Click on „Setting". The following window pops up:
_________________________________________________________________________________
- 123 -