Controlling Via Mouse - Santec DSR-2504H User Manual

Bedienungsanleitung / User manual
DSR-2504H, DSR-2516H

4.2 Controlling via mouse

You can control the recorder using a mouse. Connect a mouse (e.g. the one supplied with
this shipment) to the USB port of the recorder's front or rear panel.
In live view mode:
Double-click into the camera picture to display it as full screen.
Double-click again into the full screen to return to the split view.
Right-click to display the control menu in the lower image corner. Right-click again to hide the
control menu.
In configuration mode:
Right-click to call up the configuration menu. Right-click again to close it and to return to the
previous page.
To enter a value into an entry field, click into this field and a virtual keyboard pops up.
Use the mouse to click the required keys (letters, numbers, signs). Use the shift key to switch
to capital letters.
In playback mode:
Left-click to call up various playback options. Right-click to return to the live image.
At backup:
Left-click to call up various backup options. Right-click to retunr to the live image.
In PTZ mode:
Left-click to call up various PTZ setting modes. Right-click to return to the live image.
Note:
On the following pages, mainly the usage of the mouse is described. Howerver, you may
alternatively also use the remote control or the keys on the recorder's front panel.
_________________________________________________________________________________
- 90 -