Main Menu  Setup  Network  Sub Stream - Santec DSR-2504H User Manual

To establish an Internet connection, you have the following options:
1. If you have a DHCP server and would like your recorder to automatically obtain an IP
address and other settings, please enable the checkbox „Obtain an IP address
automatically". The IP address, subnet mask, gateway and DNS server are
automatically obtained.
2. If you want to configure your own network settings, disable the function „Obtain an IP
address automatically". You can now set your own network settings manually by
clicking into the respective field and bringing up the virtual keyboard.
3. If you want to connect to the Internet via PPPoE, please disable the function „Obtain
an IP address automatically" and enable the box „PPPoE". Enter your user name and
password using the virtual keyboard.
You can check the network connection by clicking on „Test".
If everything runs to your satisfaction, please click on "Apply".
8.1.6.2 Main menu  Setup  Network  Sub Stream
Here you can define – either per channel or for all channels (see last row) – the following:

Resolution

Frame rate (fps)

Encode

Quality (only adjustable if VBR has been selected for „Encode")

Max. Bitrate

Click on "Apply" to save your settings.
_________________________________________________________________________________
- 114 -
Bedienungsanleitung / User manual
DSR-2504H, DSR-2516H