Main Menu  Setting  Storage  Schedule - Santec SCVR-2411K User Manual

7.5.4.1 Main menu  Setting  Storage  Schedule
Here you can adjust settings for:
Record:
Select the desired channel and define the pre-recording time (1-30 seconds).
Redundancy: To be able to use this function, at least one HDD has to be defined as
redundant. If a total of only one HDD exists, this function is not available.
Define the event type by ticking the respective box:
Green = Normal
Yellow = Motion
Red = Alarm
Blue = Motion & alarm
Enable the desired weekday or all days.
You may define the schedule per day and per hour for each event type. There are 2
options to do so:
o Enable the desired alarm type and click on the time bar of the respective day
to enter the time or time frame.
o Click on the wheel symbol and enter the time or time frame.
Use the eraser symbol to delete the respective alarm type for the specific day.
Max. 6 times or time frames per day can be defined for all event types.
Use the copy function to copy the settings to other channels.
Snapshot:
To setup a schedule for snapshot creation, please proceed as described above for
recordings.
The image attributes for a snapshot, e.g. image size, image quality, etc, are defined here
Main menu  Setting  Camera  Encode  Snapshot (see chapter 7.5.1.2)
_________________________________________________________________________________
SCVR-2411K, SCVR-2411TK, SCVR-2812TK
- 44 -
User manual