Table of Contents
Advertisement
Chapter 3 Appendix
1.
Error Message
When an error is detected by POST, the display shows an error message. In addition, depending on the error
contents, your server might beep to report that an error occurred.
Messages indicating a memory error
(in this example, the message indicates
that CPU1_DIMM1 and CPU1_DIMM4
have failed, and that DIMM1 has been
forcibly started up)
The following table lists error messages and the actions to take in response to them.
126
System Monitoring Check
... Passed
ERROR
AE81: CPU1_DIMM1 with error is enabled.
AE01: CPU1_DIMM1 has been disabled.
AE04: CPU1_DIMM4 has been disabled.
Press <F1> to resume, <F2> to setup
• Write down the displayed messages and beep patterns before contacting your
Tips
sales representative. Alarm messages are useful information for maintenance.
• The list only contains messages for the server. For details about error messages
of optional devices, and the actions to take, refer to the instructions that come
with each product.
• You may ask your maintenance personnel who has an expert knowledge to
Tips
check installation status, remove, or replace hardware for the server.
• Write down the messages on display unit or virtual LCD, and beep patterns
(beep code) before contacting your sales representative. Alarm messages are
useful information for maintenance.
• IPMI information is also useful for maintenance.
• The list only contains messages for the server. For details about error messages
of optional devices, refer to the instructions that come with optional product.
Express5800/R120d-1E, R120d-2E Maintenance Guide
1. Error Message
Advertisement
Table of Contents
