Table of Contents
Advertisement
Chapter 2 Convenient Features
1.2.6
Save & Exit
If you move the cursor to Save & Exit, the Save & Exit menu appears.
The options of this menu are described below.
(a)
Save Changes and Exit
SETUP closes with all the changes saved in NVRAM (Non-volatile memory). After SETUP closes, the
system automatically reboots.
(b)
Discard Changes and Exit
SETUP closes without saving the changes in NVRAM. The setting at startup of SETUP is retained.
After SETUP closes, the system automatically reboots.
(c)
Save Changes
Changes are saved in NVRAM.
(d)
Discard Changes
The changes are discarded and the settings are reset to the one at startup of SETUP.
(e)
Load Setup Defaults
This option resets all values in the SETUP utility to the default settings.
Note
The factory settings and default values may differ depending on the model.
Reconfigure each item according to your environment by referring to parameters
described in this section.
Express5800/R120d-1E, R120d-2E Maintenance Guide
1. System BIOS
91
Advertisement
Table of Contents
