NEC R120d-1E N8100-1954F Maintenance Manual page 101

Chapter 2 Convenient Features
5. Press the <F10> key to specify Select Configurable Array(s), and then press the space key.
SPAN-1 is set.
SPAN-1
6. Press the <F10> key to create a Virtual Drive.
The Virtual Drive(s) Configured screen is displayed. The following screen shows an example of RAID1
consisting of two Hard Disk Drives. On this screen, xxx.xxxGB indicates the capacity.
VD
0
RAID = 1
Units = MB
Size
DWC
RA
Accept
SPAN = NO
Select Configurable Array(s)
A-0
Virtual Drive(s) Configured
RAID Size
1 xxx.xxxGB
Virtual Drive 0
= xxxxxxMB
= Off
= On
Express5800/R120d-1E, R120d-2E Maintenance Guide
#Stripes StripeSz
2 64 KB
4. RAID System Configuration
Status
ONLINE
101