Chapter 3 Appendix
(3)
Error messages on a virtual LCD
In EXPRESSSCOPE Engine 3 (BMC) web browser window, you can confirm virtual LCD error messages (for
details on the virtual LCD, refer to "EXPRESSSCOPE Engine 3 User's Guide").
The table below shows the error messages displayed on upper and lower lines, description, and solution.
•
Messages displayed on an upper LCD line
XX POST Started...
[Description]
Displayed while POST is running. "XX" denotes POST code (POST Progress Code) that is running.
[Recommended action]
This is not an error.
XX BIOS Rev YYYY
[Description]
Displayed while POST is running. "XX" denotes POST code (POST Progress Code) that is running, and
"YYYY" denotes system BIOS version.
[Recommended action]
This is not an error.
POST Completed Successfully
[Description]
Indicates that POST completed normally.
[Recommended action]
Express5800/R120d-1E, R120d-2E Maintenance Guide
1. Error Message
Message displayed on
upper LCD line
Message sent from BIOS
Message displayed on lower
LCD line
Message sent from BMC
141