NEC R120d-1E N8100-1954F Maintenance Manual page 79

Express5800 series
Hide thumbs Also See for R120d-1E N8100-1954F:
Table of Contents

Advertisement

Chapter 2 Convenient Features
For details about the options, see the table below.
Password Configuration
Administrator Password
User Password
Security Configuration
Password On Boot
Disable USB Ports
Remote Keyboard and Mouse
Trusted Computing
Option
Up to 20
alphanumeric
characters
Up to 20
alphanumeric
characters
[Disabled]
Enabled
[Disabled]
Front
Rear
Internal
Front + Rear
Front + Internal
Rear + Internal
Front + Rear +
Internal
Disabled
[Enabled]
Express5800/R120d-1E, R120d-2E Maintenance Guide
Parameter
When the <Enter> key is pressed, the
password entry screen to set administrative
right is displayed.
With this password, access to all SETUP
menus is allowed.
Password can be set only when SETUP is
started with administrative right. If no
password is set, SETUP starts with
administrative right.
When the <Enter> key is pressed, the
password entry screen to set user right is
displayed. With this password, access to
SETUP menus is limited. The user password
can be set when SETUP is started by
administrative right or user right.
Enable or disable the feature that requires a
password entry on boot. This option can be
selected when Administrator Password is
set.
Select a USB port to be disabled. Note that
USB keyboard is enabled only while the POST
is running.
If the internal USB port is disabled, Internal
Flash Memory cannot be used.
Enable or disable the remote keyboard and
mouse supported by BMC.
This submenu is available for configuration
only when TPM kit is installed. it can be
selected when Administrator Password is set..
1. System BIOS
Descriptions
[
]: Factory setting
79

Advertisement

Table of Contents
loading

Table of Contents