Table of Contents
Advertisement
D D One-touch reply using the call record
The stored call signs in the call record can be used to the call.
qAfter receiving a call, push and hold [RX➝CS](CALL) for
1 sec.
Or, while pushing and holding [RX➝CS](CALL), rotate
[DIAL] to select the desired call sign record.
-DUP
-DUP
DV
DV
439 706
B
AAAAAA
The received call sign is displayed while pushing and
holding [CALL/RX➝CS] when [DIAL] is rotated while
[CALL/RX➝CS] is pushed.
• Set your own call sign (MY) in advance. (p. 34)
• The call sign stored in "CALLER" is stored as "UR," "RXRPT1" is
stored as "R2" and "RXRPT2" is stored as "R1."
• Error beeps sound when a call sign is received incorrectly, and
no call sign is set in this case.
wPush [PTT] to transmit; release to receive.
DV MODE OPERATION (Optional UT-121 is required)
25
Important!
Setting call signs with the "One-touch reply using the call
record" operation as at left are for temporary operation only.
Therefore, the set call signs will be overwritten when an-
other call record is used to set call signs.
• Never saved into a call sign memory.
If you want to save the set call signs, see "Copying the call
record contents into call sign memory"
✔ For your information
When a call specifying your call sign is received, the call signs
of the calling station and the repeater it is using can be used
for operation automatically.
• When "RX call sign auto write"
station call sign in "CALLER" is set to "UR" automatically.
• When "Repeater call sign auto write"
the stored station call sign in "RXRPT1" is stored as "R2"
and "RXRPT2" is stored as "R1" automatically.
7
for details.
(p. 50)
is set to "AUTO," the
(p. 93)
is set to "AUTO,"
(p. 93)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
47
Advertisement
Table of Contents
