Fieldbus Connections; Ethernet Interface - Datalogic DS6400 Reference Manual

6

6 FIELDBUS CONNECTIONS

6.1 ETHERNET INTERFACE

This connector is only available for DS6400 Ethernet models and allows the Ethernet
connection between the host and the reader.
Figure 77 –DS6400 M12 4-pin D-Coded Female Ethernet Connector
This interface and the connector pinout (see the following table) are IEEE 802.3 10 BaseT
and IEEE 802.3u 100 Base Tx compliant.
Pin
1
2
3
4
In order to meet EMC requirements use Ethernet shielded cable.
The Ethernet interface can be used for TCP/IP communication with a remote or local host
computer by connecting the scanner to either a LAN or directly to a host PC. There is no
need to use a crossover adapter since scanner incorporates an auto-cross function.
The following is an example of a connection to a LAN using a CAB-ETH-M0x straight
through cable:
For further details refer to the "Ethernet Service Guide" document provided as reference
documentation.
58
3
M12 4-pin D-coded Female Pinout
Name
TX +
RX +
TX -
RX -
DS6400
TX+
1
RX+
M12 2
D-coded
TX- 3
RX-
4
Figure 78 – Straight Through Cable
DS6400 REFERENCE MANUAL
4
1
2
Function
Transmitted data (+)
Received data (+)
Transmitted data (-)
Received data (-)
LAN
TX+
1
3 RX+
RJ45
2 TX-
RX-
6
4
5
7
8